| ... with own bearings |
 AMG 10 (Single-/Multiturn) |
| Singleturn (= absolute steps per turn): |
13 bit (= 8,192) |
 |
EURO flange B10, solid shaft d= 11 mm |
| Multiturn (= turns of shaft): |
12 bit (= 4,096) |
Protocols SSI, Option: EnDat |
| Interface absolute: |
SSI, Option: EnDat |
Protection class: IP 66 |
| Output amplitudes: |
approx. 1 Vpp |
|
| Square-wave cycles per turn: |
512 |
|
| Bandwidth: |
>= 200 kHz |
|
| Connection: |
Terminal box |
|
| Permissible encoder temperature: |
-30°C ... +100°C |
|
| Shock resistance (6 ms): |
1,000 m/s² |
|
| Weight: |
approx. 2 kg |
UL approved |
| |
| AMG 11 (Single-/Multiturn) |
| Singleturn (= absolute steps per turn): |
13 bit (= 8,192) |
 |
EURO flange B10, solid shaft d= 11 mm |
| Multiturn (= turns of shaft): |
16 bit (= 65,536) |
Protocols CANopen, Profibus DP and SSI |
| Interface absolute: |
CANopen, Profibus DP, SSI |
Parametrization by PC using interface box HEAG 182 (accessory / SSI only) |
| Logic level: |
HTL (C), TTL (R) |
| Square-wave cycles per turn: |
1,024, 2,048 |
Protection class: IP 67 |
| Max. output frequency: |
120 kHz |
Option: Redundant systems |
| Connection: |
Plug connection, connection terminals (bus cover, terminal box) |
Option: Hybrid bearings |
| Permissible encoder temperature: |
-20°C ... +85°C |
Option: Special corrosion protection |
| Shock resistance (6 ms): |
1,000 m/s² |
|
| Weight: |
approx. 3 kg |
UL approved |
| |
| HMG 11 (Single-/Multiturn) |
| Singleturn (= absolute steps per turn): |
13 bit (= 8,192) |
 |
Hollow shaft up to d= 20 mm |
| Multiturn (= turns of shaft): |
16 bit (= 65,536) |
Hybrid bearings |
| Interface absolute: |
CANopen, Profibus DP, SSI |
Option: Cone shaft 1:10 |
| Logic level: |
HTL (C), TTL (R) |
Protocols CANopen, Profibus DP and SSI |
| Square-wave cycles per turn: |
1,024, 2,048 |
| Max. output frequency: |
120 kHz |
Parametrization by PC using interface box HEAG 182 (accessory / SSI only) |
| Connection: |
Plug connection, connection terminals (bus cover, terminal box) |
Protection class: IP 67 |
| Permissible encoder temperature: |
-20°C ... +85°C |
Option: Redundant systems |
| Shock resistance (6 ms): |
1,000 m/s² |
Option: Special corrosion protection |
| Weight: |
approx. 3 kg |
UL approved |
| |
 AMG 71 (Single-/Multiturn) |
| Singleturn (= absolute steps per turn): |
13 bit (= 8,192) |
 |
|
| Multiturn (= turns of shaft): |
16 bit (= 65,536) |
|
| Interface absolute: |
SSI |
Multiturn: patented counting procedure without gearbox / battery |
| Output amplitude: |
1 Vpp (peak to peak) |
Protocols SSI |
| Sinewave cycles per turn: |
2,048 |
| Max. output frequency: |
>200 kHz |
Parametrization by PC using interface box HEAG 182 (accessory / SSI only) |
| Connection: |
connection terminals |
Protection class: IP 66 |
| Permissible encoder temperature: |
-20°C ... +85°C |
|
| Shock resistance (6 ms): |
1,000 m/s² |
|
| Weight: |
approx. 0,35 kg |
UL approved |
| |
| AMG 75 (Singleturn) |
| Singleturn (= absolute steps per turn): |
22 bit (= 4,194,304) |
 |
Protection class: IP 55 |
| Interface absolute: |
SSI |
Option: IP 65 |
| Logic level: |
TTL |
|
| Square-wave cycles per turn: |
1024, 2048, 4096, 8192, 16384, 65536, 131072 |
|
| Max. output frequency: |
5 MHz |
|
| Connection: |
12 pins connector |
| Permissible encoder temperature: |
-35°C ... +85°C |
|
| Shock resistance (12 ms): |
200 m/s² |
| Weight: |
approx. 660 g |
|
| |
|
UL approved |
| |
| AMG 81 (Single-/Multiturn) |
| Singleturn (= absolute steps per turn): |
13 bit (= 8,192) |
 |
EURO flange B10, solid shaft d= 11 mm |
| Multiturn (= turns of shaft): |
16 bit (= 65,536) |
Protocols: Profibus DP, SSI, CANopen |
| Interface absolute: |
Profibus DP, SSI, CANopen |
Parametrization by PC using interface box HEAG 182 (accessory / SSI only) |
| Logic level: |
HTL (C) or TTL (R) |
Protection class: IP 55 |
| Square-wave cycles per turn: |
2048 |
Option: Additional incremental signals with HTL (C) or TTL level for motor control systems (MCTRL) |
| Max. output frequency: |
120 kHz |
| Connection: |
12 pins connector |
|
| Permissible encoder temperature: |
-20°C ... +85°C |
| Shock resistance (6 ms): |
100 m/s² |
|
| Weight: |
approx. 1.5 ... 2.0 kg |
UL approved |
| |
| HMG 161 (Single-/Multiturn) |
| Singleturn (= absolute steps per turn): |
13 bit (= 8,192) |
 |
Through-hole hollow shaft up to d= 70 mm |
| Multiturn (= turns of shaft): |
16 bit (= 65,536) |
Protocols: CANopen, Profibus DP and SSI |
| Interface absolute: |
CANopen, Profibus DP, SSI |
Protection class: IP 56 |
| Logic level: |
HTL (C), TTL (R) |
Option: Insulated bearing |
| Square-wave cycles per turn: |
2,048 |
Option: Additional incremental signals with HTL (C) or TTL level for motor control systems (MCTRL) |
| Max. output frequency: |
120 kHz |
| Connection: |
Connection terminals (bus cover, terminal box) |
Parametrization by PC using interface box HEAG 182 (accessory / SSI only) |
| Permissible encoder temperature: |
-20°C ... +85°C |
| Shock resistance (6 ms): |
2,000 m/s² |
|
| Weight: |
approx. 2 kg ... 3 kg |
UL approved |
| |
| ... without own bearings and with magnetic sensing |
| |
| MHAP 100 B5 (Singleturn) |
| Singleturn: |
8 ... 17 bit |
 |
Through-hole hollow shaft with d= 38 ... 75 mm |
| Interface absolute: |
SSI |
Protection class: wheel IP 68 / head IP 67 |
| Permissible encoder temperature: |
-20°C ... +85°C |
Tangential magnetic sensing |
| Shock resistance (2 ms): |
3000 m/s² |
Large mounting tolerances |
| Connection: |
17 pins flange socket (clockwise, male) |
Option: additional incremental signals |
| |
|
|
| |
|
|
| |
|
Without own bearings |
| |
| MHAP 200 B5 (Singleturn) |
| Singleturn: |
8 ... 17 bit |
 |
Through-hole hollow shaft with d= 50 ... 180 mm |
| Interface absolute: |
SSI |
Protection class: wheel IP 68 / head IP 67 |
| Permissible encoder temperature: |
-20°C ... +85°C |
Tangential magnetic sensing |
| Shock resistance (2 ms): |
3000 m/s² |
Large mounting tolerances |
| Connection: |
17 pins flange socket (clockwise, male) |
Option: additional incremental Signals |
| |
|
|
| |
|
|
| |
|
Without own bearings |
| |
| MHAP 400 B5 (Singleturn) |
| Singleturn: |
8 ... 17 bit |
 |
Through-hole hollow shaft with d= 160 ... 340 mm |
| Interface absolute: |
SSI |
Protection class: wheel IP 68 / head IP 67 |
| Output amplitudes: |
approx. 1 Vpp |
Tangential magnetic sensing |
| Shock resistance (2 ms): |
3000 m/s² |
Large mounting tolerances |
| Connection: |
17 pins flange socket (clockwise, male) |
Option: additional incremental signals |
| |
|
|
| |
|
|
| |
|
Without own bearings |
| |
| MHGA 400 (Singleturn) |
| Singleturn: |
10 bit |
 |
Through-hole hollow shaft up to d= 380 mm |
| Interface absolute: |
SSI |
Protection class: IP 67, Option: IP 69 K |
| Output amplitudes: |
approx. 1 Vpp |
Tangential magnetic sensing |
| Sinewave cycles per turn: |
256 |
Large mounting tolerances |
| Connection: |
17 pins flange socket (clockwise, male) |
With additional incremental track |
| Permissible encoder temperature: |
-20°C ... +85°C |
|
| Shock resistance (12 ms): |
200 m/s² |
UL approved |
| |
|
Without own bearings |
| |
|
Technical modifications reserved.
|
AMG 10 (Single-/Multiturn) 
